With input of 50 or 60 Hz, output frequencies of
50, 60, or 400 Hz are available as standard. For
custom designed systems, fixed frequency outputs from
25 Hz to 1200 Hz may be selected, or we can provide
continuously variable frequency using a VFD on the
motor. Power capacities range from 10 kVA to 20,000
kVA and up, depending upon system requirements.
Typically, Kato furnishes a factory-programmed PLC
control panel to provide a complete power conversion
or isolation system. The panel is usually unit-mounted
but can also be free-standing
or wall-mounted. The panel will include the motor
starter, output circuit breaker, metering, protective
relaying, a voltage regulator
and any other required components. Manual and
automatic paralleling is also available.
Our basic line has the following specifications:
Synchronous motor-generator sets
| Hz |
kVA |
Volts |
| 50-50 |
up
to 25,000 |
120
to 13,800 |
| 60-60 |
up
to 25,000 |
120
to 13,800 |
| 60-400 |
up
to 400 |
120
to 600 |
| 50-400 |
up
to 300 |
120
to 600 |
| 60-50 |
up
to 25,000 |
120
to 13,800 |
| 50-60 |
up
to 25,000 |
120
to 13,800 |
| Other
frequencies available: RTF |
Additional motor-generator sets with controls
Variable frequency: up to 25,000 kVA
Ride thru: through the kVA range
Parallel control systems: through the kVA range
General product options
Weather-proof enclosures
and air filters
Trailer mount
Distribution panels
Custom control systems
Reduced current motor starter (lower inrush than full
voltage)
Go here for construction
features.
